Club 80-90 Forums

Welcome to the wonderful world of T25 camping.and all that goes with it...

Hi Sarah,
Thats a pretty eventful weekend
Not sure what mech skills Andy (El Sketcho) has, but I know he lives West London.
It might be worth your while sending him a PM and see if he'll come and take a look / help/ suck teeth and pull chin etc.

Sarah x

did that bit that fell off look like it had a onion on the endof it?
if so chances are its just lost the 13mm nut and washer that holds it on the gearbox?
maybe im thinking along the wrong lines, post a pic up in the thread ??

Thx Sezi, I'll have a go at PMing him.

I've arranged to buy a Haynes Manual but won't get it till the F&G meet.

Yes the bit that fell off looks like a bung with an onion on one end and a large rubber o ring type thingy. The breakdown mechanic was pretty sure it was the locator and it is pretty perished.

I put a photo on my FB page but not sure how to load one up here and FB crashes my machine at the mo.

I'll try to put it on the 80-90 FB group page.........

Ta

This is the bit of Travelling chick's, that fell orf the gearbox.

Ta TC.

Any clues anyone?

I realise this should be in the Technical Section now........... sorry!

yours has snapped it should look like this. it connects to your gearbox..part no 251711221F

oooooh! now for the tricky questions then:

what does it do?

are they cheap/easy to come by?

are they easy to fit?

TIA

Sarah

quote the number Rob has given you to VW, you might be surprised...lol

part no 251711221F

Okey dokey, I'll buzz 'em tomorrow first thing then.

Now for the ignition barrel.

The young buck who was so desperate to get Tink started for me to drive home (it was like his personal challenge not to be beaten LOL) thought getting a new barrel off any old thing and just connecting up all the wires and "fixing" it somewhere "near" the steering column was a good idea!

Bless him, he was such a nice lad and sooooooo young! Nearly aspirated thru the lack of oxygen that was managing to seap thru his aftershave!

Sorry to hear of your problems, I have got your PM and replied, Book in post Tues 14th at earliest oppertunity. Hope it is fixable without too much trouble. I will get under my van tommorow and have a look close up and see how it all goes together. Hopefully it will be simple replacement without dismantaling too much. If you can't get replacement part, if you have the 2 bits that used to be 1, maybe it could be welded??

Steve

it connects the bit that is connected to the bit at the bottom of your gear stick that goes to the bit on the side of your gearbox.(sorry about being so technical)

what does it do?

[quote="Steve the "T""]Sorry to hear of your problems, I have got your PM and replied, Book in post Tues 14th at earliest oppertunity. Hope it is fixable without too much trouble. I will get under my van tommorow and have a look close up and see how it all goes together. Hopefully it will be simple replacement without dismantaling too much. If you can't get replacement part, if you have the 2 bits that used to be 1, maybe it could be welded??

Steve[/quote]

Thanks Steve, appreciate it.

R0B wrote:it connects the bit that is connected to the bit at the bottom of your gear stick that goes to the bit on the side of your gearbox.(sorry about being so technical)

what does it do?

Technical or literal?

I'll re-phrase the question I guess: is it's function to do with gear locating and when I have replaced it will I be able to change gear again?

Love the Kes pic btw