Radius Rod for an 86 plate T25

Post by **HarryMann** » 16 Nov 2008, 22:47

Andy Syncro-Nutz wrote:The screw in type rods i have seen snapped rite at the lower arm

The one you saw I was asking about?

Post by **HarryMann** » 16 Nov 2008, 22:49

sgjacko wrote:The subframe and bar were, to put it politely......s*&%ged!

He means the chassis pick-up point at the front I presume...

Post by **Andy syncro-nutz** » 16 Nov 2008, 23:15

HarryMann wrote:
sgjacko wrote:The subframe and bar were, to put it politely......s*&%ged!

He means the chassis pick-up point at the front I presume...

FAIRWYNDS WROTE!
Strewth!
Just a thought, but it WAS bushed wasnt it? I saw one (at a breakers yard!) that was bolted DIRECTLY to the sub frame! The subframe and bar were, to put it politely......s*&%ged!

Stop editing posts!

Post by **HarryMann** » 17 Nov 2008, 01:56

That's Not an E D I T Andy that's a straight Quote

The fact I attributed it to 'sgjacko' was a Mistake

Apologies fairwynds and sgjacko !

==
The point is that 'someone' saw another one broken at the "subframe" and looked like rubbers were missing and was a right mess, so making 3
==

Here's sgjacko's, looking a bit worse for wear...

https://club8090.co.uk/wiki/images/Radiu ... ken_01.jpg

The image will show (embedded) when we solve the last of a host of problems caused by our service providers re-assigning their server clusters, or whatever they do to annoy us periodically

Website · Post by **CovKid** » 17 Nov 2008, 11:38

Looks like structural weakness in the metal finally giving way through corrosion. Not a common occurence I'll wager.

Post by **Simon Baxter** » 17 Nov 2008, 20:58

They break fairly frequently.
Usual thing is for the radius rod bush sleeve to be almsot nothing and the rod starts getting nibbled away, sometimes snapping there, between the bushes but I have seen late ones breaking off just after the thread by the bottom arm.
Radius rod bushes I can guarantee will be knackered unless you have had them replaced.
I don't even think I have taken one off and been able to put it back on again.
The sleeves are obsolete hence me getting the stainless ones made.

Post by **andymacdonald30** » 17 Nov 2008, 21:52

I repaced the sleves and bushes on my 81 t25 with new parts from GSF
But this was 2 years ago
Have they gone obsolete now
I need to do my 87 t25 now
If they are no longer available I will just make some

Andy

Post by **HarryMann** » 17 Nov 2008, 23:20

Bushes still available I think... sleeeves form SB or DIY, dimensions in Wiki if got a lathe

Post by **sgjacko** » 18 Nov 2008, 21:59

So it seems that it sould stay put until i find a part then get it towed to a garage.. If anyone has any ideas where i can get the radius rod from i would be very greatful

Cheers again Simon

Post by **HarryMann** » 18 Nov 2008, 22:44

CJ at syncrospares will have one, or Syncro-Nutz, Shotts

Club 80-90 Forums

Radius Rod for an 86 plate T25

New sleeves