Posted: 04 Jun 2008, 23:34
You will break good 1/2" powerbars and cheap T-bars getting them off.
Most 46mm sockets are 3/4" and a decent 3/4" T-bar you won't break, even with a pudlok on the end.
Get them off with this though, easy... http://wiki.80-90.co.uk/index.php/Gener ... ut_spanner
No broken T-bars, then as you shouldn't even break a 1/2" re-tightening to 350 ft-lbs + next split-pin hole
Most 46mm sockets are 3/4" and a decent 3/4" T-bar you won't break, even with a pudlok on the end.
Get them off with this though, easy... http://wiki.80-90.co.uk/index.php/Gener ... ut_spanner
No broken T-bars, then as you shouldn't even break a 1/2" re-tightening to 350 ft-lbs + next split-pin hole