starting problem 1915cc t25

Post by **Mocki** » 22 Mar 2008, 11:33

its back to basics then...........
1.take a lead off, insert a spark plug, ground the outer, and get someone to spin the engine, check you have a spark - if yes
2.check fuel is reaching the carb - if yes
3.check timing

4.if no to 1. check spark from king lead (coil to dissy) - if yes, check rotoe arm and dissy cap, make sure dissy cap has got a springloaded nipple in center

if no to 4 check earth lead (brown) from ignition unit is connecting to earth point on top of lhs head, check ignition unit is working(substitute only way)

Anonymous · Post by **Anonymous** » 22 Mar 2008, 12:35

Hmm will have a look at it. Find it odd that it dont run now when all they did was steal the three parts. Would have thought replacing them with new would have got the van back up and running. Worries me what they have done to it!

Post by **Mocki** » 22 Mar 2008, 12:40

just because you bought new doesnt mean they are good........its common for leads and dissy caps to be naff out of the packet from places such as gsf and europarts...... also, just occured to me, you did get the correct leads didnt you, some have centre pins, and need you to take the caps off the plugs, and some are old type which need the caps on the plugs...... grasping at straws now mate.........

Anonymous · Post by **Anonymous** » 22 Mar 2008, 12:59

I will take some photos in the engine bay of the dissy and leads etc

Back in a bit!

Anonymous · Post by **Anonymous** » 22 Mar 2008, 14:09

Anonymous · Post by **Anonymous** » 22 Mar 2008, 14:19

ok how do i get pics up??

Post by **HarryMann** » 22 Mar 2008, 14:23

They need hosting on a website and then paste the link into here and use the Image button above to put tags around the link (select link and hit the button)

Anonymous · Post by **Anonymous** » 22 Mar 2008, 14:26

i got them hosted but when I tried to upload it just put the link up!

Post by **HarryMann** » 22 Mar 2008, 14:32

When hosted OK, get them showing in your browser, copy the link in the url bar at top, goto Rely post forum window and paste into there. Then select and click the 'Img' button above...

or put these tags a round the pasted link

[img]http://My%20link[/img]

Anonymous · Post by **Anonymous** » 22 Mar 2008, 14:33

Anonymous · Post by **Anonymous** » 22 Mar 2008, 14:36

Anonymous · Post by **Anonymous** » 22 Mar 2008, 14:37

Post by **Grun** » 22 Mar 2008, 14:56

Yer T'is desperado,

[img:500:374]http://www.muchos.co.uk/members/69type2/van%201.jpg[/img]

Anonymous · Post by **Anonymous** » 22 Mar 2008, 15:10

thanks grun

Can you do these too please?

[img:500:375]http://www.muchos.co.uk/members/69type2/van%204.jpg[/img]

[img:500:375]http://www.muchos.co.uk/members/69type2/van%205.jpg[/img]

cheers

edited by mocki, if you click E D I T, you will see what i did - dont leave spaces in address lines(where the % is now)

Post by **Grun** » 22 Mar 2008, 15:15

[img:500:375]http://www.muchos.co.uk/members/69type2/van%202.jpg[/img]