Steering Column problem

Post by **Louey** » 16 Jan 2006, 22:12

my spacer is made from 30 amp wire

but it is solid

Post by **Louey** » 20 Jan 2006, 10:05

I'll get round to fixing this ....

one day

Post by **Louey** » 02 Feb 2006, 09:15

Right , I've finally order the parts I think I need

part numbers 5 & 16 off the above diagram. Took the column apart on Tuesday afternoon and found that the top bearing was worn and because I might need the spacer I though it would be best to but a new standard spacer and cut a bit of the old one to make up the extra 3-5mm required.

I will try and get some piccies of the job as I go along so it can be Wickied