Pilot/spigot bearing puller

[Mr Bean]

Yes me too. Hovis white for my Beans on toast every time. 
Anyway I wouldn't be surprised if the whole whole meal thing is just white bread with a hand full of sweepings chucked into the mix.
But then I would be looking for factory precision just like one gets with Heinz Baked Bean. 
 (Other baked beans are available)   

[steveo9007]

Wonder if there is a particular brand that’s best. Can’t beat a bit of Mothers Pride

[Mr Bean]

Wonder if there is a particular brand that’s best. Can’t beat a bit of Mothers Pride

What for eating or hydraulicking?

For bread one could make the argument that it should have functionality as a substrate for the support of supplementary foodstuffs and for instance, and at least pleasant for mastication.

While for hydraulicking a dense stodgy glutinous but smooth pasty consistence would be needed containing no air.

Although considering some of the carp some people eat I guess anything goes.
 

[Oldiebut goodie]

Crucian, Common or Mirror? ( or even Koi? )

[steveo9007]

Or ghost

[Titus A Duxass]

Or Grass

[Mr Bean]

Or Grass

Wow! That must have Bean what I got given many years ago. It soon outgrew my pond so I gave it to my brother in law who had a much larger pond. But he recently removed the pond in a garden refurb and it is now with a family who have an even bigger pond. I suppose the proper thing to do was to research a suitable water and release it back to the wild so he/she could meet many fishermen every weekend  but he/she was such a tame  creature - nibbling your fingers and generally doing the pond fish thing that it never occurred to us. 
Happy days.

 

[Titus A Duxass]

One of these?

[Mr Bean]

One of these?

Yes that looks right and the last time I saw it it was approaching 500mm long.
 

[steveo9007]

i used the correct tool in the end, couldn't make up my mind about the bread to use, but the correct tool pulled the spigot bearing out in 2 sharp blows to the rear, good job i changed it as the spigot bearing casing was cracked in 2 places and the rollers had dropped out inside the hole they are fitted in. 



This is the tool i used 15mm blind bearing puller