Let's see those T25 (T3) engine bays

[itchyfeet]

Do I see a blanked-off coolant hose on the early thermostat housing by #4 cylinder?

Sent from my S60 using Tapatalk

Yep

This van had two thermostats too, it was an early DG engine fitted into a late van but rather than buying the right water pump and pipes it was bodged.

It worked though so maybe a genius at work

[937carrera]

A little contribution from me.

Lots of water cooled things so far so here's an air cooled CU from my project van. Lots of bits removed, air cleaner etc for ease of access to pour fuel down the throats, engine guard for turning over when checking tappets. Rear engine cover looks very non original. Poor light so the quality isn't great

[sarran1955]

Hello,

Time to throw in another air-cooled card..



Came out as a 1.6......went back as a 1.8....

Air-cooled bliss........

Cordialement,

[BambooBilly]

36yrs of dust?

[clift_d]

36yrs of dust?

That's what some call 'rat look'

[937carrera]

That's what some call 'rat look'

Nah, just shows how reliable those old Aircooled CU motors are

[what2do]

Standard 1.9 dg from the devon.
And the 2.1 dj in the syncro, standard apart from the aftermarket air conditioning.

Sent from my SM-G950F using Tapatalk

Aftermarket A/C, please tell us more.

[Bigjcc55]

It's pretty much the same as a factory set up, bracket for the compressor is a bit home made but otherwise much the same.
I've converted the fittings and seals to take 134 refrigerant as the old gas is no longer available.
Between that and the roof tent you don't pass many petrol stations.

Sent from my SM-G950F using Tapatalk

[300CE]

Untitled by Justin C, on Flickr

[nevill3]

An early photo of my 1.6cs

[Oldiebut goodie]

I remember those days when mine was a CS.
What is that piece of trickery in the fuel line? Is it one of those so-called fuel conditioners?

[nevill3]

Good eyesight there OBG, yes it was on the fuel line when we purchased it and a little Googling suggests I have a device that improves my fuel economy,I beleive you may have called it snake oil in the past. I have had no reason to remove it so until I replace the fuel lines it will stay, I do have a cover for the timing belt now but I am lacking the rubber grommet and spacer for the center mounting bracket so it has remained on the workshop (shed) shelf for a while.

[Woodyyellow]

Empty engine bay!

Views of my engine bay - currently empty, in preparation for the installation of a Subaru ej20.
All unnecessary bits removed, cleaned and painted.

IMG_0114 by Grandpawoody, on Flickr

IMG_0113 by Grandpawoody, on Flickr

IMG_1875 by Grandpawoody, on Flickr

IMG_1876 by Grandpawoody, on Flickr

Will update when “new” engine fitted!

[nevill3]

Will you be renewing the sound proofing on the bulkhead before the new engine goes in?

[Woodyyellow]

Hi
Yes, all striped out, wire retainers wire brushed and painted. New sound barrier on order.
Cheers
John