I have a feeling I'm going to be looking for one of these engines very shortly.
In terms of donor vehicles for an SB/RA, I'm aware of Golf Mk2, Jetta Mk2, Passat B2, Passat B3, Audi 80 and Audi 90. Are there any others that I could be looking out for?
Can we use an engine from any of these, or are there insurmountable differences re engine mounts and the like that would prevent engines from certain vehicles being used?
What kind of price range should I be looking to pay for one of these engines?
RA/SB engine option
Moderators: User administrators, Moderators
- clift_d
- Registered user
- Posts: 3401
- Joined: 04 Oct 2012, 23:51
- 80-90 Mem No: 11695
- Location: Hackney innit
Re: RA/SB engine option
1988 LHD T25 1.6TD Westfalia Club Joker Hightop syncro
- Oldiebut goodie
- Registered user
- Posts: 7484
- Joined: 18 Apr 2008, 01:19
- 80-90 Mem No: 11135
- Location: Eastern Angle
Re: RA/SB engine option
http://vag-codes.info/vag-engines may help - no other vehicles listed there but does give the years of fitment. (VW and Audi files needed)
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
- clift_d
- Registered user
- Posts: 3401
- Joined: 04 Oct 2012, 23:51
- 80-90 Mem No: 11695
- Location: Hackney innit
Re: RA/SB engine option
I had seen that in an earlier post, but thanks anyway. Generally I think the internals etc are the same across all the installations. Since I'll probably be using all the ancilliaries from our JX the fitting / location of these is also less relevant.
The thing that I don't know however is whether the mounting points are common? If I can only find an engine from an Audi 80 or Passat then would that mean I need some form of adaptor to make it fit the JX engine bars?
The thing that I don't know however is whether the mounting points are common? If I can only find an engine from an Audi 80 or Passat then would that mean I need some form of adaptor to make it fit the JX engine bars?
1988 LHD T25 1.6TD Westfalia Club Joker Hightop syncro
- Oldiebut goodie
- Registered user
- Posts: 7484
- Joined: 18 Apr 2008, 01:19
- 80-90 Mem No: 11135
- Location: Eastern Angle
Re: RA/SB engine option
I have seen a couple of posts in the past about which ones have the correct mounting holes but it would take a good search to find them. Might even have been on the Yard.
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶