CU Engine Questions...
Moderators: User administrators, Moderators
-
Bluebell1983
- Registered user
- Posts: 18
- Joined: 14 Feb 2019, 05:50
- 80-90 Mem No: 0
Re: CU Engine Questions...
Thanks 
-
sarran1955
- Registered user
- Posts: 1470
- Joined: 11 Mar 2009, 18:51
- 80-90 Mem No: 6754
- Location: 6, les Hauts de Sarran 19800, Sarran ,Limousin ,FRANCE
Re: CU Engine Questions...
Hello,
Aaah..some Air-Cooled fun..
Although you want to this job in-situ, here is a video that goes into some detail on the fitting of the push rod tubes:
Do you have the wongly spring that holds the pushrods in place??
These must be in good condition and fitted correctly to stop the tubes from drifting and leaking.
There should be no need for goop...
Hope this helps,
Cordialement,
Aaah..some Air-Cooled fun..
Although you want to this job in-situ, here is a video that goes into some detail on the fitting of the push rod tubes:
Do you have the wongly spring that holds the pushrods in place??
These must be in good condition and fitted correctly to stop the tubes from drifting and leaking.
There should be no need for goop...
Hope this helps,
Cordialement,
