EliteVw
Moderators: User administrators, Moderators
Re: EliteVw
The Extra cost was for a long list of parts that were needed. They said they had it all running sat and it was done. I was expecting it delivered mon, then wed, then thursday. Thursday they phoned to say it needed a new alternator and that would be an extra £50 fitted. Sounded dodgy to me so i told them to leave it as is. Did a google search and found several horror stories on Volks zone. Now Fri, no van. They never call me, i have to keep chasing it up. All paid for too.
- ghost123uk
- Registered user
- Posts: 6855
- Joined: 10 Mar 2006, 10:15
- 80-90 Mem No: 2585
- Location: John in Malpas, in the very S. W. part of Cheshire.
- Contact:
Re: EliteVw
I stand to be corrected, but I believe Steve at Gasure uses Elite engines and he is well known on here for knowing his stuff. I believe the well respected Campershack use them as well.
I do know of one person in the east Midlands that had an issue with an Elite engine, but in that case Elite came out with a flat bed lorry, took the van away, fitted another engine and delivered it back within a couple of days. I have not had the final chapter though, so cannot say more at this time. The person involved will know doubt post his findings when the final chapter is written.
I do know of one person in the east Midlands that had an issue with an Elite engine, but in that case Elite came out with a flat bed lorry, took the van away, fitted another engine and delivered it back within a couple of days. I have not had the final chapter though, so cannot say more at this time. The person involved will know doubt post his findings when the final chapter is written.
Got a new van, but it's a 165bhp T4 [shock horror] Accurate LPG Station map here
-
- Registered user
- Posts: 418
- Joined: 25 Aug 2009, 06:47
- 80-90 Mem No: 0
- Location: crewe
Re: EliteVw
I have heard some good things about them but I was just commenting from my own experience, not wishing to slag any one off. I do find on volks zone though a lot of them are on there to just moan and nothing more.
Jim
Jim
JRP Automotive welding,bodywork, resprays, servicing and repair.
Classic Vw's
Cheshire
07854516387
Classic Vw's
Cheshire
07854516387
Re: EliteVw
Well hopefully when i get it back, i will give a honest review of the work. Even with the extra parts it was still cheap. I have not written them off yet.
Re: EliteVw
Just spoke to them and I've been assured its coming back today..... Watch this space
- ghost123uk
- Registered user
- Posts: 6855
- Joined: 10 Mar 2006, 10:15
- 80-90 Mem No: 2585
- Location: John in Malpas, in the very S. W. part of Cheshire.
- Contact:
Re: EliteVw
jimpainter wrote:I do find on volks zone though a lot of them are on there to just moan and nothing more
Aye, it is true of forums that folks post when there is a problem, but rarely post if there is no problem. This was pointed out when I first joined 80-90 about 10 years ago, before I bought our T25, I asked why the forum was so full of posts about folk having problems with their T25s and it was pointed out that folk who don't have a problem don't write in to say "I have no problems"
Got a new van, but it's a 165bhp T4 [shock horror] Accurate LPG Station map here
- Ian Hulley
- Registered user
- Posts: 12661
- Joined: 11 Oct 2005, 08:08
- 80-90 Mem No: 1323
- Location: Wirksworth, Derbyshire ... or at t'mill
Re: EliteVw
Just noticed this thread.
I believe they (Elite) will only fit an engine when everything else is good (well you would wouldn't you ?) I don't see what would cost £700 extra on a CT engine unless the tinware was shot ? and possibly other jobs (clutch, gearbox seals, CV joints, starter) needed doing. As John said before full disclosure of facts is needed before we can really comment. I don't frequent Vzi and from what I can gather I won't be doing either any time soon.
As for Elite's engines all I can say is that our's is on 70,000+ miles and nothing to report as yet and when I do need a replacement unit it will be one of theirs.
Ian
I believe they (Elite) will only fit an engine when everything else is good (well you would wouldn't you ?) I don't see what would cost £700 extra on a CT engine unless the tinware was shot ? and possibly other jobs (clutch, gearbox seals, CV joints, starter) needed doing. As John said before full disclosure of facts is needed before we can really comment. I don't frequent Vzi and from what I can gather I won't be doing either any time soon.

As for Elite's engines all I can say is that our's is on 70,000+ miles and nothing to report as yet and when I do need a replacement unit it will be one of theirs.
Ian
The Hulley's Bus
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure
Re: EliteVw
Personally i had a veey poor experience with them ending in a huge engine fire. You do tend to get what you pay for.
1983 1.9 Ivory Westy Joker
Re: EliteVw
waltraud wrote:Personally i had a veey poor experience with them ending in a huge engine fire. You do tend to get what you pay for.
Really?!! That is worrying, fingers crossed mines ok as the bank is now empty.
-
- Registered user
- Posts: 2558
- Joined: 16 Aug 2012, 13:05
- 80-90 Mem No: 12017
- Location: Sidcup, Kent
Re: EliteVw
I have a recent 1.9DG engine from Elite and she's running sweet - now due for her first service. I thought it best to replace most ancillaries as well as I didn't want anything to fail and damage the engine, plus it meant I knew where I stood with everything. The only thing different was that my mate fitted the engine.
One thing I would suggest is that you get the mixture/timing checked on the carb from a local tuning company - I had this done and only cost me £20.
I have put up a post re the engine replacement in the 'what did you do to you T25 today'.
Hope it all goes well & keep us updated.
One thing I would suggest is that you get the mixture/timing checked on the carb from a local tuning company - I had this done and only cost me £20.
I have put up a post re the engine replacement in the 'what did you do to you T25 today'.
Hope it all goes well & keep us updated.
'86 DG, Weber Carb
- ghost123uk
- Registered user
- Posts: 6855
- Joined: 10 Mar 2006, 10:15
- 80-90 Mem No: 2585
- Location: John in Malpas, in the very S. W. part of Cheshire.
- Contact:
Re: EliteVw
How did their work cause your engine fire ?waltraud wrote:Personally i had a veey poor experience with them ending in a huge engine fire. You do tend to get what you pay for.
Got a new van, but it's a 165bhp T4 [shock horror] Accurate LPG Station map here
- keith
- Registered user
- Posts: 2507
- Joined: 04 Jun 2007, 12:15
- 80-90 Mem No: 5169
- Location: stoke on trent
Re: EliteVw
As with most transactions.....there is one golden rule which should never be breached......unless you want to open wide the doors to risk and buggery.
It is.....keep your money in the bank...or your pocket until you are happy with the goods.
I apply this in the local chip shop now.....show me the fish and chips....and i will give you the 3.50.
Never left the chip shop without my dinner.
It is.....keep your money in the bank...or your pocket until you are happy with the goods.
I apply this in the local chip shop now.....show me the fish and chips....and i will give you the 3.50.
Never left the chip shop without my dinner.
1989 Westfalia Joker TDi
Discovery 5
Couple of motor bikes
Discovery 5
Couple of motor bikes
Re: EliteVw
VAN IS BACK! Better late than never, took it for a quick drive and its quieter, smoother and seems to drive lovely. New lights are much better too, can acutely see where I'm going now. I will let you know in a couple of weeks if I'm still smiling.
-
- Registered user
- Posts: 2558
- Joined: 16 Aug 2012, 13:05
- 80-90 Mem No: 12017
- Location: Sidcup, Kent
Re: EliteVw
Tobyt25 wrote:VAN IS BACK! Better late than never, took it for a quick drive and its quieter, smoother and seems to drive lovely. New lights are much better too, can acutely see where I'm going now. I will let you know in a couple of weeks if I'm still smiling.
Great stuff, here's to many happy miles of motoring!

https://club8090.co.uk/forum/viewtopic.p ... start=4470" onclick="window.open(this.href);return false;
'86 DG, Weber Carb