1.9DG CRANKSHAFT SEALS

Post by **Simon Baxter** » 01 Oct 2006, 17:51

Have you shimmed the flywheel/driveplate properly?
Does the crank have a groove in it?

Post by **Simon Baxter** » 01 Oct 2006, 18:53

Have you checked/set the crank endfloat with a Dail Test Indicator?

Post by **Simon Baxter** » 01 Oct 2006, 20:30

You should always check it if you have had it in pieces.
How far have you stripped it? have you got the thrust washers in the crank if the case has been split?
With the engine in the van can you test for endfloat on the crank pulley?

Post by **Simon Baxter** » 01 Oct 2006, 21:40

Oil in water or water in oil?
could be as simple as a oil cooler? Which engine? 2.1? Does it have a oil cooler?