servo hose? Sorted thanks!

Post it here, if it doesn't fit any of the above.

Moderators: User administrators, Moderators

Locked
User avatar
very_bland
Posts: 253
Joined: 11 Oct 2009, 01:19
80-90 Mem No: 7610
Location: Stourbridge

servo hose? Sorted thanks!

Post by very_bland »

Another silly question no doubt, but here goes

Right, the pipe work on this was reet brittle and snapped
Image

I presume that this is the servo hose(?)

The hose seems to be heat crimped or something ::shrug:: onto the non return valve.... assuming the valve is fine am I alright to use a bit of fuel hose of the appropriate girth and jubilee clips to attached the valve back up to the carb balancing pipe? (thats the bit where it snapped)..... or is that foolish? i.e Rather than sourcing the hard plastic tubing, and getting it sealed onto the valve unit.

Thanks in advance (again)

Billy
Last edited by very_bland on 16 Feb 2011, 18:02, edited 1 time in total.

User avatar
R0B
Moderator
Posts: 16610
Joined: 07 Oct 2005, 17:33
80-90 Mem No: 864
Location: Cheshire

Re: servo hose?

Post by R0B »

2.1 LPG/Petrol Auto Caravelle

User avatar
very_bland
Posts: 253
Joined: 11 Oct 2009, 01:19
80-90 Mem No: 7610
Location: Stourbridge

Re: servo hose?

Post by very_bland »

Cheers Rob, I assume that it doesn't really matter that its for a 1.9WBX

I should have put that it is for a 2l AC in the first post, apologies for that!

Billy

User avatar
R0B
Moderator
Posts: 16610
Joined: 07 Oct 2005, 17:33
80-90 Mem No: 864
Location: Cheshire

Re: servo hose?

Post by R0B »

No mate.It matters not
2.1 LPG/Petrol Auto Caravelle

User avatar
very_bland
Posts: 253
Joined: 11 Oct 2009, 01:19
80-90 Mem No: 7610
Location: Stourbridge

Re: servo hose?

Post by very_bland »

Grand! Cheers Rob!


Locked