Kitchen Window - Seal from kitchen to window

Thin bits of metal and bright blue light. Including glass & trim.

Moderators: Moderators, User administrators

Post Reply
royalengineerfish
Posts: 6
Joined: 26 Mar 2020, 17:40
80-90 Mem No: 0

Kitchen Window - Seal from kitchen to window

Post by royalengineerfish »

Hi
I am undertaking the complete internal refit of my T25 and l am missing the seal between the kitchen window and the inside. Hard to explain. The window is fine but there is a 30mm gap (ish) from the window to the internal wall behind the kitchen all the way around the window. Is there a source to buy a new fitting or is it something l will have to make. Any help would be great, l did try adding photo

Thanks
Andy

Fugeh
Posts: 162
Joined: 27 Jun 2019, 12:37
80-90 Mem No: 0

Re: Kitchen Window - Seal from kitchen to window

Post by Fugeh »

88 Autosleeper Trident 1.9
Hythe, Kent.

royalengineerfish
Posts: 6
Joined: 26 Mar 2020, 17:40
80-90 Mem No: 0

Re: Kitchen Window - Seal from kitchen to window

Post by royalengineerfish »

Hi

Thanks for reply, its not the window seal it is like the window surround, sill but 360 degrees around, its around 2" gap between outer van and internal room, where the installation is.
Thanks
Andy

Fugeh
Posts: 162
Joined: 27 Jun 2019, 12:37
80-90 Mem No: 0

Re: Kitchen Window - Seal from kitchen to window

Post by Fugeh »

I think you're referring to the moulding/shroud? My Autosleeper had had them and I was pretty gung ho on the removal and ending up binning them thinking they would be easily replaced. I haven't been able to source any. I'm thinking of fabricating something up to bridge the gap and covering in leather/vinyl.
88 Autosleeper Trident 1.9
Hythe, Kent.

Fugeh
Posts: 162
Joined: 27 Jun 2019, 12:37
80-90 Mem No: 0

Re: Kitchen Window - Seal from kitchen to window

Post by Fugeh »

88 Autosleeper Trident 1.9
Hythe, Kent.

royalengineerfish
Posts: 6
Joined: 26 Mar 2020, 17:40
80-90 Mem No: 0

Re: Kitchen Window - Seal from kitchen to window

Post by royalengineerfish »

Thanks l have a better idea now.

Post Reply