Pulsating break pedal

Post by **vwrickshaw** » 04 Sep 2019, 09:20

Hi, i lowered my bus 40mm allround, and started to get pulsating pbreak pedal..did anyone else come across this and what did you do to solve the issue...

Post by **Jeff J** » 04 Sep 2019, 13:06

I always thought that was caused by warped brake discs.

Post by **vwrickshaw** » 04 Sep 2019, 15:22

No, I am a engineer and measured disc and they are well in tolerance....it's something else...i am doing investigation..

Post by **Cobra88** » 04 Sep 2019, 17:13

Loosen all the rear wheel nuts and retorque them carefully in two stages. 90 then 180nm in the correct order.

T25s are really fussy when tightening the rear wheel nuts (At least mine is)

works for me

Post by **vwrickshaw** » 04 Sep 2019, 17:41

Thankyou for everyone's advice....

Post by **Ralf85** » 04 Sep 2019, 19:07

I had this problem. It was caused by uneven wear on the rear wheel hubs causing the rear brakes to pulsate. Replaced those and the problem went away.

Post by **Mocki** » 04 Sep 2019, 19:53

When I had the same issue it turned out to be a damaged rear tyre .

Post by **Oldiebut goodie** » 04 Sep 2019, 20:23

Mine was a warped rear drum caused by a rear cylinder seizing. New drum sorted it. (+ cylinder)

Post by **footstuck** » 21 Apr 2020, 22:10

Tyre Bulge was a problem on mine too.

Club 80-90 Forums

Pulsating break pedal

Pulsating break pedal

Re: Pulsating break pedal

Re: Pulsating break pedal

Re: Pulsating break pedal

Re: Pulsating break pedal

Re: Pulsating break pedal

Re: Pulsating break pedal

Re: Pulsating break pedal

Re: Pulsating break pedal