Using T trim question

The Tardis factor (interiors, awnings, roofs etc)

Moderators: User administrators, Moderators

Post Reply
pjjones00
Posts: 18
Joined: 14 Oct 2009, 18:21

Using T trim question

Post by pjjones00 »

Hi I want to make some cupboards and use the T trim locker trim. The stuff that makes the door sit halfway in and rest on the rubber. Can anyone let me know what size cut I need to make so the doors sit snug with the trim in place when I have cut the door out of the face. I will use a slot cutter for the trim to knock into.

I hope this makes sense.

pieman1
Posts: 67
Joined: 22 Jul 2009, 10:08
80-90 Mem No: 8418
Location: barrow

Re: Using T trim question

Post by pieman1 »

I used 1.8mm bud from http://www.grasshopperleisure.co.uk/" onclick="window.open(this.href);return false;

pjjones00
Posts: 18
Joined: 14 Oct 2009, 18:21

Re: Using T trim question

Post by pjjones00 »

Thanks, But I need the cut size for the doors to allow for the locker trim not for the slot cutter. I think it may be 6mm.

pieman1
Posts: 67
Joined: 22 Jul 2009, 10:08
80-90 Mem No: 8418
Location: barrow

Re: Using T trim question

Post by pieman1 »

Yep I put two doors in my van 6 -7 mm

pjjones00
Posts: 18
Joined: 14 Oct 2009, 18:21

Re: Using T trim question

Post by pjjones00 »

Thanks. Much appreciated.

Post Reply