Route of oil pressure cable

An alchemy of sparks, copper wire and earth

Moderators: Moderators, User administrators

Post Reply
Ciaoflyer
Posts: 80
Joined: 04 Mar 2015, 21:08
80-90 Mem No: 0

Route of oil pressure cable

Post by Ciaoflyer »

I’m having trouble getting the correct route for the oil pressure switch cable without it touching the exhaust/engine and getting burned. It has the two switches, one at pushrod tubes and one at rear below water pump. Can anyone one advise the correct route for this cable? Cheers again 😀

User avatar
937carrera
Posts: 3417
Joined: 05 Apr 2015, 19:29
80-90 Mem No: 16333
Location: N Yorks.

Re: Route of oil pressure cable

Post by 937carrera »

90 degree spade on the switch, then vertically upwards to the top of the crankcase and then past the dizzy.

At least that's what I remember from changing the switch and doing the earth bypass on the dizzy to temporarily silence the DOPS system.
1981 RHD 2.0 Aircooled Leisuredrive project, CU engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine

Post Reply