Starter Motor wiring

An alchemy of sparks, copper wire and earth

Moderators: Moderators, User administrators

Post Reply
PhilNorwich
Posts: 1
Joined: 28 Jul 2020, 18:13
80-90 Mem No: 0

Starter Motor wiring

Post by PhilNorwich »

Hi All, my first post on here, I used to have T2s but now have a T25
My van won't start, it won't turn over, i've changed the starter motor, relay, ignition switch and even tried a different battery, i've tracked it down to starter not getting 12v when i ran a continuity cable, my question is how do i ran a new cable from fusebox the starter, where exactly on the fusebox do i need to change?

TIA

Phil

User avatar
937carrera
Posts: 3512
Joined: 05 Apr 2015, 19:29
80-90 Mem No: 16333
Location: N Yorks.

Re: Starter Motor wiring

Post by 937carrera »

Start off by reading the wiring diagram available from http://syncrosport.com/info/wiring/

When you have done that you will discover that there is no fuse on the starter cable

Checks to do:

Battery fully charged (sorry) ?
Continuity from battery +ve to starter terminal ?
What voltage at the starter teminal ?
Earth straps in good condition ?
Remove the solenoid wire, 12v when the ignition switch is put into the run position ?
1981 RHD 2.0 Aircooled Leisuredrive project, CU engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine

User avatar
Mocki
Membership Admin
Posts: 15162
Joined: 29 Sep 2005, 09:27
80-90 Mem No: 428
Location: Mansfield tel/txt 07947137911
Contact:

Re: Starter Motor wiring

Post by Mocki »

It would help if you added the details of your vehicle to your profile or signature 

there is no fuse, or relay , the starter has a solenoid which is a relay . 
Steve
tel / txt 07947137911
Image
just one shade of very fast grey
________________

1989 2.1LpgWBX HiTop Leisuredrive Camper

robertneill602
Posts: 17
Joined: 11 Sep 2020, 10:40
80-90 Mem No: 0

Re: Starter Motor wiring

Post by robertneill602 »

A Haynes Manual will help. On the wiring diagram there maybe single point joints marked with a T suffix. These maybe be behind the fusebox and kick panels in the cab/around under dashboard area. Would also check the wiring loom condition around floor entry and underside of van. I don't know if there are further points such as the steering column and underdash body seems on where the wiring loom can rub against.

Post Reply