![Image](http://i221.photobucket.com/albums/dd300/chill300c/bezel1.jpg)
![Image](http://i221.photobucket.com/albums/dd300/chill300c/bezel2.jpg)
I know - too much time on my hands.
Moderators: User administrators, Moderators
CovKid wrote:Can't see the SA ones being any different. You're absolutely correct in thinking "where are the screws" as they (or clips) don't come with lights. A cursory look suggests they don't fit. However, the lucas type lugs do definately drop neatly into the recesses so its only a case of making the clips needed to hold lamp in place. After that, they can be adjusted using same screws as stock lamps. Clearly its been done before, hence ECP flogging them as such, even if they don't provide a how-to.
I looked at them for some time, realising that they located ok before a chat with Oldie but Goodie confirmed that they only needed a little bench work to fix them in place.
If you like, hold on until I get the Landrover ones (week or so) and I'll add those to the WIKI.You still need to make up the clips but its no headache really. The difference would be that the Landrover ones will be made out of modern plastics but I imagine the beam will be far superior and the LEDs add a little glam. They'll fit series 1 landrovers so the lugs will be identical.
Better pic of light unit: http://images.esellerpro.com/2133/I/443/2/IMG_3908.JPG" onclick="window.open(this.href);return false;
and in the dark: http://images.esellerpro.com/2133/I/443 ... 20Copy.jpg" onclick="window.open(this.href);return false;
Just remember, you WILL have to make up some clips though. I know of none available commercially (I hunted high and low) but I'm sure even the very stiff wire used to hold in headlight bulbs could be bent and made to clip lamps in firmly.
Something like:- not tried it but should work. I did it differently (check WIKI).
itchyfeet wrote:CJH
just a thought, rather than a right angle bracket with a rivet you could have used a flat plate with two holes to connect the tab on the adjuster ring to the tab on the bezel with two screws.
itchyfeet wrote:Have been looking for a circular flat ring that you can screw to the adjuster ring, you can then drill holes and mount defender bezels unmodified, seen some candidates but nothing certain yet.