Dashboard PCB Replacement (CJH Design)

[The Hairy Camper]

Sounds really interesting. I look forward to seeing what you create.

[icosahedron]

Looking at Twinturbo's measurement of the dash connection, I see that the image resolution of CJH's connector board is not the same as that of the main board. Here are my measurements of the connector board in millimeters:

[The Hairy Camper]

Thanks Icosahedron, looks like our final measurements were not too far off. The biggest difference I had was the height, I had a 3mm difference

[JamesT25]

This is an interesting post. I did some work on this a while ago
viewtopic.php?t=177008

Happy to provide any files. I used jlc PCB to produce the PCBs and was very happy with the price and quality. I don't know how they do it for the prices they charge!!

[TwinTurbo]

usee JLC for 5 years or more. even used the cnc service to make an alternatpr adaptor for my ford pinto based kit car

[TwinTurbo]

I see you used trailer cable for the flylead, i had that in mind too.

[The Hairy Camper]

Great post, James. I like your design. It looks like you also went with the multiple board design.

Appreciate the offer to share your files, my prototype is almost finished now.

[TwinTurbo]

all boards have left hong kong airport... 

[TwinTurbo]

Clearing customs in london...