The sliding door on our van has suddenly stopped coming outwards when you open it so we have to manually pull it outwards before sliding it back otherwise the internal panelling rubs against the bodywork when we slide it. Anyone know why this is happening?
Thanks
Sliding door. Not popping out.
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 47
- Joined: 04 Jan 2019, 11:34
- 80-90 Mem No: 0
- Aidan
- Trader
- Posts: 6557
- Joined: 11 Oct 2005, 19:21
- 80-90 Mem No: 742
- Location: Llanfyllin, mid Wales : )
- Contact:
Re: Sliding door. Not popping out.
probably corrosion on the pivot arm and mount, the seal is probably split (they often are) and water has got in washing out any lube and causing a build up of rust
-
- Registered user
- Posts: 47
- Joined: 04 Jan 2019, 11:34
- 80-90 Mem No: 0
Re: Sliding door. Not popping out.
Sounds about right. So I need to replace the seal on the pivot arm? Re lubricate etc
Re: Sliding door. Not popping out.
Yes, suggest that you get access to the moving components, clean up and lubricate well.
I'm still battling with my sliding door where the back edge pivots open but the lock at the front seems to be seized. I have a very stubborn bolt so I can't get the lock off the door - driving me crazy!
I'm still battling with my sliding door where the back edge pivots open but the lock at the front seems to be seized. I have a very stubborn bolt so I can't get the lock off the door - driving me crazy!
1980 2l CU Aircooled; left-hand drive - now officially a historic vehicle!