Cracked alternator bracket

Big lumps of metals and spanners. Including servicing and fluids.

Moderators: User administrators, Moderators

Post Reply
Slaydog
Posts: 28
Joined: 16 Aug 2016, 18:26
80-90 Mem No: 0

Cracked alternator bracket

Post by Slaydog »

Hi all,

Been getting some belt squeak so went to tighten it and found it all in a bit of a mess.
Firstly, the pulleys don't look aligned. Closer inspection showed a crack in the alternator bracket, but the bracket is defo a makeshift one - it looks a pretty rusty piece of steel and is using bolt holes in the right side of the engine block opposed to the original ones. I'm assuming this 'fix' was done because the original bracket failed, but does anyone have any advice on how to fix it more successfully?

ImageImageImage

Thanks
Ben
1990 Holdsworth 1.9DG on 2e3 Manual 4 Speed

Stesaw
Posts: 340
Joined: 10 Aug 2019, 23:30
80-90 Mem No: 17004
Location: Coventry

Re: Cracked alternator bracket

Post by Stesaw »

New bracket from Brickwerks I woulda thought would be best
1985 LeisureDrive 1.9DG 5 Speed

User avatar
silverbullet
Trader
Posts: 13649
Joined: 08 Jun 2009, 09:51
80-90 Mem No: 6908
Location: Surrey Syncronaut #156
Contact:

Re: Cracked alternator bracket

Post by silverbullet »

Thats been botched up using one of the PAS pump mounting holes on the rh head.
85 syncro Caravelle twin slider Oettinger T3200E-6
90 SA Microbus supercharged wbx/UN1 project

http://www.025motorsport.com

Slaydog
Posts: 28
Joined: 16 Aug 2016, 18:26
80-90 Mem No: 0

Re: Cracked alternator bracket

Post by Slaydog »

Yep, I’m guessing the correct holes were no longer usable. I guess I could just get someone to do a better job mounting it on a custom steel plate using the PAS holes if so?

If the original mounting holes are ok then the below sounds like an option. Just wondering if anyone had any insight on fixing it as it sounds like a common problem reading the background:

https://campervanculture.com/shop/vw-t2 ... t-fix-kit/

Thx


Sent from my iPhone using Tapatalk
1990 Holdsworth 1.9DG on 2e3 Manual 4 Speed

Slaydog
Posts: 28
Joined: 16 Aug 2016, 18:26
80-90 Mem No: 0

Re: Cracked alternator bracket

Post by Slaydog »

Looks like @itchyfeet helped someone solve the problem properly here...


viewtopic.php?p=8152266


Sent from my iPhone using Tapatalk
1990 Holdsworth 1.9DG on 2e3 Manual 4 Speed

Slaydog
Posts: 28
Joined: 16 Aug 2016, 18:26
80-90 Mem No: 0

Re: Cracked alternator bracket

Post by Slaydog »

Don’t think much can be done to salvage the original bolt holes?


Image


Sent from my iPhone using Tapatalk
1990 Holdsworth 1.9DG on 2e3 Manual 4 Speed

User avatar
DoubleOSeven
Posts: 1729
Joined: 25 Jul 2014, 21:10
80-90 Mem No: 14520
Location: Reading, England
Contact:

Re: Cracked alternator bracket

Post by DoubleOSeven »

Machine shop can fix that. Depends how much they want you to strip the engine down for them. I had one in a similar state, and they fixed it. Take the bracket with you, so they can measure off it.

Image
1984 Caravelle 2.1 MV

Post Reply