Oil pressure intermittent warning

Big lumps of metals and spanners. Including servicing and fluids.

Moderators: User administrators, Moderators

Digger65
Posts: 9
Joined: 15 Sep 2020, 17:07
80-90 Mem No: 0

Re: Oil pressure intermittent warning

Post by Digger65 »

Thanks
404 on wiring diag though

As I say I will start to bell out every junction When I can get hold of a multimeter
Have new switches coming anyways
probably worth having in spares box
While potentially not a fatal error it might turn into a long winded one
J

User avatar
937carrera
Posts: 3572
Joined: 05 Apr 2015, 19:29
80-90 Mem No: 16333
Location: N Yorks.

Re: Oil pressure intermittent warning

Post by 937carrera »

Try again..... double dipped on the url originally

Wiring stuff can be long winded, but a cheap fix in the end when time is free
1981 RHD 2.0 Aircooled Leisuredrive project, CU engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine

User avatar
Mocki
Membership Admin
Posts: 15277
Joined: 29 Sep 2005, 09:27
80-90 Mem No: 428
Location: Mansfield tel/txt 07947137911
Contact:

Re: Oil pressure intermittent warning

Post by Mocki »

 Score you get all excited in the wiring diagram , have you earthed the yellow wire out at the 7 pin round plug in the black box ? It not very often the fault is further forward than the engine bay , unless nastiness has happened at the dash circuit .... 

I would be tempted to just knock a new cable up to ge from the oil pressure sender to the 7 pin in the black box so you know you have good wire , replacing the brown then yellow and that white double spade junction .
(assuming you have some suitable wire and a couple of crimp connectors laying about ) 
Steve
tel / txt 07947137911
Image
just one shade of very fast grey
________________

1989 2.1LpgWBX HiTop Leisuredrive Camper

Digger65
Posts: 9
Joined: 15 Sep 2020, 17:07
80-90 Mem No: 0

Re: Oil pressure intermittent warning

Post by Digger65 »

Yeah that’s is pretty much what I will do I think
Do the cylindrical connectors Just pull apart Or twist and pull?
I guess there is a Ferrell or some such that I will need to connect to inside
J

Digger65
Posts: 9
Joined: 15 Sep 2020, 17:07
80-90 Mem No: 0

Re: Oil pressure intermittent warning

Post by Digger65 »

Ok
Spliced
Past the white spade connector and looks to have hopefully solved the issue
Will run it for a few days and then do a more permanent heat shield/shrink job on it
thanks for everyone’s input
J

Post Reply