Big lumps of metals and spanners. Including servicing and fluids.
1 post • Page 1 of 1
I’ve read the wiki and checked my fan is working. Both speeds kick in and out with the use of the paper clip so all seems to be ok. However, the positive (red/white) wire on my connector is on the one end of the connector and not in the middle as the Wiki suggests. I therefore wanted to just ask if this would affect operation at all? It all appears original so I’m assuming as a simple switch it doesn’t but confirmation would be reassuring.
1990 Komet Autohomes 1.9 DG 5 Speed