Club 80-90 Forums

Hello guys, I found an A4 Audi and I start removing parts from it for myconversion... It has an AJL engine instead of an AEB also drive by cable not wire and an DHF code gearbox that seems it come from an TDI... I have remove all the engine harness up to the ECU box at the firewall. I would like to ...

Lee is absolutely correct...I try 3 small circuit boards devices in the blinking car.2 are blink 1 is not.Then I put one of the good ones in the other car...No blink, change the vac sw and is blinking !

Jim

Agree...If I willing to spend that much I will get an 16"....

Maybe you are right but I do have right now 5 cars and blinking only on one of them...I know that some are early models but I have three 91 ones that differs a few cars in chassis #...

Weird...

Desperate demand for sikas...Weird isn't it ?
I mean that nowdays there is a lot of non payers in ebay...

You can buy a genuine 16" good project for this sum of money...But not RHD...
It will fetch 3.5k easily...But I am not sure if it will be sold actually...

Hello guys, In my syncro the front diff is blinking before engagement.I don't like this at all and I prefer the older non-blinking system.I remove the covers in diff locks panel and the large one that is back from it but I was unable to find anything more than my other syncro that has the old system...

I am almost sure that you are dealing with a faulty cold start valve.

Cheers

Jim

How much is this truck worth guys ?

Cheers Jim

I am glad that you have sort it out
Also is a good idea to check the short rubber connection for wear too ?

Jim

It can be removed with the pulley still in place.It requires a long or a T shaped allen 6mm to undo the two bolts that secure the pipe to the pump..

Today I was be able to take a lot of pictures of the truck...

What do you think it is worth to restore ?

Dealer says the R&P was dropped w/o replacement from 2007 ! :( As I have an rear gearbox with difflock and 5.43 R&P and no front I plan to make this 6.17 to use it with my 6.17 front diff but now it seems a bit more hard to find one... Any lead to found one it will be greatly apreciated. Tha...

I already know that Russel
I also looking for hubs and a rear 6.17 R&P as well!

Jim

Elvis : do you still have 16" rear brakes ? If so how much for a set ?

Cheers,

Jim