Search found 6130 matches

by Mocki
Today, 19:53
Forum: Electrical & Instrumentation
Topic: Three way fridge problem
Replies: 7
Views: 106

Re: Three way fridge problem

From your picture, you need to introduce +12v to the black wire onto the igniter and see if the blue is already neg
by Mocki
Today, 19:52
Forum: Electrical & Instrumentation
Topic: Three way fridge problem
Replies: 7
Views: 106

Re: Three way fridge problem

What model fridge is it ?
Wiring and manuals are online
by Mocki
Today, 17:33
Forum: Electrical & Instrumentation
Topic: Three way fridge problem
Replies: 7
Views: 106

Re: Three way fridge problem

The ignition feed should be coming from the fuse board from the leisure battery , and you will be able to check there is power on the connection block on the top of the fridge where the mains power is also connected into a connector next to the 12v for the heating element and the ignition supply . Y...
by Mocki
15 May 2024, 19:58
Forum: Mechanical
Topic: Clutch replacement
Replies: 1
Views: 58

Re: Clutch replacement

It’s hydraulic. Only the early 1.6 petrol Aircooled was cable
by Mocki
15 May 2024, 19:55
Forum: Electrical & Instrumentation
Topic: Three way fridge problem
Replies: 7
Views: 106

Re: Three way fridge problem

The igniter often stops working due to corroded “earth” connections down at the back of the fridge in the burner area . You might be able to access it from the outside by taking the big vent off (If its been installed with the twin caravan vents) Failing that you will need to remove the fridge , but...
by Mocki
14 May 2024, 21:27
Forum: Bodywork, Seats & Glass
Topic: Water under driver and passenger floor mats after heavy rain.
Replies: 5
Views: 167

Re: Water under driver and passenger floor mats after heavy rain.

Prime suspects will be the window screen and or the washer jets
by Mocki
14 May 2024, 19:24
Forum: Campers
Topic: Another 3-way fridge problem
Replies: 18
Views: 379

Re: Another 3-way fridge problem

Image
Is the bit you are working with, common on all the 42 series and the earlier versions so should be able to get one
by Mocki
14 May 2024, 15:45
Forum: Campers
Topic: Another 3-way fridge problem
Replies: 18
Views: 379

Re: Another 3-way fridge problem

Sounds like it’s corroded up , but not all of them push to turn , the push is normally after zero and hold to override the thermo couple . Brass spindle , so good old plus gas squirted round it may do the trick . Depending on the model , most parts are available anyway , either new or second user ……
by Mocki
10 May 2024, 18:37
Forum: Mechanical
Topic: Help needed with DF to DG engine change
Replies: 2
Views: 86

Re: Help needed with DF to DG engine change

Yes, you need the DG throttle cable , dont try bodging it , they are nasty when they stick wide open !!!
by Mocki
07 May 2024, 23:11
Forum: Mechanical
Topic: DG engine vacuum hoses?
Replies: 4
Views: 141

Re: DG engine vacuum hoses?

Just blank it off , it operated the hot/cold feed off the exhaust which is not needed in uk climate , it’s one less thing to worry about
by Mocki
07 May 2024, 20:00
Forum: Mechanical
Topic: DG engine vacuum hoses?
Replies: 4
Views: 141

Re: DG engine vacuum hoses?

The other vac pipe goes from the base of the carb to the air box , and you can just blank it off on the port on the base of the carb and , as long as its blanked off airtight , forget about it
by Mocki
07 May 2024, 19:42
Forum: Electrical & Instrumentation
Topic: Probably not right...
Replies: 4
Views: 153

Re: Probably not right...

I would expect the ePas to be on the main ignition switched feed
by Mocki
06 May 2024, 18:52
Forum: Mechanical
Topic: Crisis may be looming?
Replies: 19
Views: 694

Re: Crisis may be looming?

How about sorting the leak first ? Actually get under it and clean everything off and dry it all so you stand a chance of seeing what is the issue . Fill it up with water (not coolant) and watch where its coming from , before going down it doom and gloom route . It may well be coming from a hose or ...
by Mocki
03 May 2024, 15:52
Forum: Electrical & Instrumentation
Topic: Help needed
Replies: 9
Views: 390

Re: Help needed

Sorry i want awake , and was getting frustrated …… i will remove my bit on the post
by Mocki
03 May 2024, 09:36
Forum: Mechanical
Topic: Failure of plastic gear linkage bush
Replies: 3
Views: 201

Re: Failure of plastic gear linkage bush

Where dis you buy it ? JK?