Club 80-90 Forums

Pretty sure RAL9010 is as close as you will get

Cheapest way is to use your insurance if you have screen cover and the excess isnt stupid…….
They wont care the screen has been out a few days before they get to it , less work for the fitter

No, it is not baloney , they are a balanced system, same as the eberspácher, if they are different lengths they howl like a banchie

It isnt really a issue unless the tank needs to blow off the pressure release , which in reality has only ever happened to me twice , once during filling because the pump was at too high a pressure , and once when the van was parked so the tank was in the sun on a extremely hot day back in 2021 , ne...

I would try and get in touch with Mick memberlist.php?mode=viewprofile&u=24011
He should have all you need genuine parts

And no, you dont need to remove the hub nut to get the drum off

From your picture, you need to introduce +12v to the black wire onto the igniter and see if the blue is already neg

What model fridge is it ?
Wiring and manuals are online

The ignition feed should be coming from the fuse board from the leisure battery , and you will be able to check there is power on the connection block on the top of the fridge where the mains power is also connected into a connector next to the 12v for the heating element and the ignition supply . Y...

It’s hydraulic. Only the early 1.6 petrol Aircooled was cable

The igniter often stops working due to corroded “earth” connections down at the back of the fridge in the burner area . You might be able to access it from the outside by taking the big vent off (If its been installed with the twin caravan vents) Failing that you will need to remove the fridge , but...

Prime suspects will be the window screen and or the washer jets

Is the bit you are working with, common on all the 42 series and the earlier versions so should be able to get one

Sounds like it’s corroded up , but not all of them push to turn , the push is normally after zero and hold to override the thermo couple . Brass spindle , so good old plus gas squirted round it may do the trick . Depending on the model , most parts are available anyway , either new or second user ……

Yes, you need the DG throttle cable , dont try bodging it , they are nasty when they stick wide open !!!