Club 80-90 Forums

Thanks Steve

Strange as it is an autosleeper, though has clearly been messed with over the years.

Kitchen and bed are being refurbished - at least that's one less thing to attend to!

Cheers, Chris

I'm currently refurbishing the interior of my T25 'project' and when dismantled I noted that the rock and roll seat doesn't have the metal hinges joining the two halves together. Both seats have these sprung metal arms which appear to act in their place but not sure they are adequate? Have seen othe...

I've not tried to fit the LED yet. I was expecting to just plug the LED into the housing ( the picture on Ebay showed an LED with 2 prongs just like the existing bulb ) but I didn't realise the LED came with a resistor attached to one leg which makes the LED prongs too long to fit into the black pl...

Managed to source the correct resistor anda 2009mcd blue led that slots straight in. Thanks for your help with this. Your drawing helped a lot!

Search for EBAY seller Spiratronics, he lists warm white 3mm 12v LEDs. In packs of 3. Send him a message and make sure the ones he sells do not have a resistor in the leg. Regards modifying the dash to accept a standard 5mm or 3mm LED, if your dashboard retains the original membrane PCB then you wi...

I've not tried to fit the LED yet. I was expecting to just plug the LED into the housing ( the picture on Ebay showed an LED with 2 prongs just like the existing bulb ) but I didn't realise the LED came with a resistor attached to one leg which makes the LED prongs too long to fit into the black pl...

I've got a failed main beam warning light on my 1991 T25 Autosleeper - I got a replacement blue capless bulb from Brickwerks thinking this was the correct replacement bulb but now that I've stripped the dash out the bulb won't fit. The existing bulb ( which is black i.e. blown) is not a capless bul...

Hi. My T25 has failed it's MOT due to the above. I've removed the instrument binnacle though not the ribbon yet. Are the instrument lights holding it in place just twist fit as they're incredibly stiff? Is there anything special about the telltale light. I believe it's an led - advice on where to bu...