Club 80-90 Forums

It should just plug into the round 7pin connector, wire colours are the same both sides but check because your van donor is early and I have not seen an early black box wiring then there is the red to stud in black box which is permanent 12V Finally the black to black spade in black box which is ig...

No you don't understand, the 2.1 your van had was probably an MV with Digifant, I'm not talking about that. The 1.9 you have has Digijet so should be very similar to my engine pic, ignore the difference in engine capacity between your donor and my engine its the Digijet engine management system you...

do you have the afm and idle speed valve, not on your picture. seen here on my 2.1 digijet https://farm5.staticflickr.com/4414/36937780112_be19e53007_b.jpg DJ Engine bay2 by Paul_Barr , on Flickr Hi Itchyfeet, thanks for the photos,I dont have anything from the 2.1 engine at all apart from the ecu,...

looks like a standard digijet dizzy on the 1.9 should be pretty mucy plug and play, I'm wondering if the old 2.1 was a digifant becuse if they are both digijet then the difference in looms may be early to late, do you have a pic of the old engine/distributor? did you remove the old engine yourself?...

That 1.9 donor is an injection engine, we don't get those in uk I'm wondering if its digifant as I don't recognise the ECU, can you take a pic of the 1.9 distributor? strip the engine wiring loom for the 1.9 injection system out of the van and get some photos. do the same for the 2.1 loom. the engi...

Just swap alll the 2.1 stuff over to the 1.9 and carry on? The engines are exactly the same , everything that bolts on is with injection will become the same spec as a DH engine Thanks Mocki but like I said to Itchyfeet, dont have any of the 2.1 stuff , injectors etc, so have to use all the donor p...

is the 2.1 digijet or digifant? 1.9 is actually much more simple than a 2.1 but you could try using the 2.1 injecton on the 1.9 :D get some pics up helps us to see what you have, remember your specs may be different to ours pics of engine bay, black box wiring, both vehicles. we can talk you throug...

Hi all, I dont have any 2.1 injectors etc, so will have to work with all the 1.9 stuff, here's a few photos of the Donor bus and the 89... http://i64.photobucket.com/albums/h168/ridgesoarer/20170929_082339.jpg The 1.9 donor engine http://i64.photobucket.com/albums/h168/ridgesoarer/20170929_082247.jp...

Here's a good one for you, firstly, I'm in Aus, so engines are like hens teeth here! I bought an 89 T25 minus its 2.1 engine, more recently i bought an 84 T25 donor vehicle that has the 1.9 WBX engine, I'm looking for advice on how to connect the electrics to the main wiring harness as its is all to...