Club 80-90 Forums

Brickwerks sell this, so I’d use that.

The Westy ply one is on page 2 of this thread, if it helps.

viewtopic.php?t=170565&hilit=1984+caravelle&start=15

Should be this ^^

Sump Plug M14X1.5, you can go up to M16 if it’s stripped.

Google: 7 zap vw under typ2/syncro section for part numbers

https://volkswagen.7zap.com/en/rdw/typ+ ... 1990-78/1/

https://volkswagen.7zap.com/en/rdw/typ+ ... 121-16016/

Each third generation Transporter received between 12 to 15lb (5.5 to 7kg) of paint during a task that took up to five hours. It was a lot more than a simple dip in a paint bath. Zinc phosphate was initially applied to all surfaces inside and out, to help prevent rust. Next came a zinc powder-based ...

I would recommend a second bleed once you’ve done a few
hundred miles too, just to get the last of the air out.

Good feedback.

Clean up the gearbox earth strap and the studs on the chassis it fits onto.

What about that oil breather tower, do air cooled have those? They don’t last forever.

Dunno if this would help?

https://brickwerks.co.uk/t3selector/

Type ‘rolling road near me’ into Google maps, then start calling them to see if they can manage your carb.

Sending hope.

21” goes on the drivers side BTW More friction being longer. Only experience I had recently was the metal spindle on the van wore out the softer metal of the hole in the arm of the wiper blade. Now whether that’s because I took about 3 attempts to mount them, so they lay horizontal when parked or th...

Option A: You could lap the valves, put new rings on £13.38 and get a new gasket set £126.66 in there, doing it yourself and refresh your existing engine. A top end rebuild. Option B: If you want top & bottom guaranteed to be good, I’d send it to Andrew @ Campershack (Isle of Arran, Scotland). A...

Always nice to find branded kit. Good luck. I’d just hide an inline switch wired off the coil. £2. No spark no start. They’d have to trailer it away.