VW Electrics Brake warning light

Brake Warning Light Stays On

Steve T: Had a problem with the Brake warning light staying on with the handbrake off, indication of a possible failure in the braking system or handbrake switch fault, this happened a while ago and fixed it in the same way. The cause was dirty contacts at the rear of the warning light module on the circuit board. It is possible to clean the contact points in place after removal of the wiring plug, but removal is easy and can clean much better, I had an abbrasive pencil and this did the job cleaning them up a treat solving the problem, the contacts on the plug were OK so it is just the copper contacts getting tarnished and making a poor contact. Much easier to check this first before suspecting brake pressure switch failure or brake circuit fault.

Front view