Interior non camping fitting rear 3 point belts
Seatbelt Fitting
Caravelles have pre-existing holes and threaded nuts awaiting your 3 point belt. If you have a factory converted camper the chances are it left the factory as a panel van and you will need to add your own mounting points. you can tell if your van is converted as the windows in the rear will have a squidgy bit of rubber betweeen the outside panel where the glass rubber sits, and the inside panel which will have a plastic covering strip to hide the edge where the hole for the window was cut.
There are at least 2 approaches to fitting middle seat 3-point seatbelts. If you use the original double (2 person) Caravelle seats, then they are fitted with lap belts as standard. These can be replaced with 3-point seatbelts; the seat next to the window can use an anchor fitted to the side panel (C pillar) inbetween the windows. Some T25's were factory fitted with captured nuts providing a seatbelt anchor point. (see photo below)
If not, then these need to be added - a kit to do this is available from JK.
As mentioned above, pre-existing ... to be continued