Gearbox removal brackets Thanks To Aiden (Beaker)for lending me the gear and allowing this to be reproduced. These allow you to remove the gearbox with it attached to something solid so it doesn't fall off and injure you, but it also allows some freedom of movement to wiggle the box past the various bits. I was removing a Syncro gearbox but it can be used for 2 wheel drive boxes as well.
Error creating thumbnail: sh: /usr/bin/convert: No such file or directory Error code: 127
Gearbox removal board dimensions underside jack mount this bolts through the Jack and holds the whole shebang together. The flat bit of metal is a washer to prevent the locking nut pulling though the hole on the jack
Error creating thumbnail: sh: /usr/bin/convert: No such file or directory Error code: 127
Gearbox removal board dimensions underside
Error creating thumbnail: sh: /usr/bin/convert: No such file or directory Error code: 127
Gearbox removal board dimensions
Error creating thumbnail: sh: /usr/bin/convert: No such file or directory Error code: 127
Gearbox removal board in use2
Error creating thumbnail: sh: /usr/bin/convert: No such file or directory Error code: 127
Gearbox removal board in use
Error creating thumbnail: sh: /usr/bin/convert: No such file or directory Error code: 127
Gearbox removal brackets dimensions
