VW Electrics Changing Ignition Switch
From VW T25(T3)-Tech
Revision as of 18:39, 21 September 2011 by Hacksawbob (talk | contribs) (Created page with ''''Red Westy''' just the nylon switch, NOT the whole lock mechanism!!!!! Remove steering wheel being careful not to disturb it's straight ahead position. Remove plastic colum…')
Red Westy
just the nylon switch, NOT the whole lock mechanism!!!!!
Remove steering wheel being careful not to disturb it's straight ahead position. Remove plastic column housing remove switch gear (3 screws) knock around the shear head of the housing clamp (underneath) you can put an ordinary 8mm bolt back (this shear bolt is supposed to offer a little security that's all) Put the key in the lock first position Pull off the lock mechanism Pull off switch plug Take out the ignition switch retaining screw Swap over with new switch rebuild Done