Difference between revisions of "General - H&S Drilling"
From VW T25(T3)-Tech
Jump to navigationJump to searchm (Created page with 'Watch what's behind if drilling blind e.g. fuel tank below cab floor! Drills can break and chunks of shank fly anywhere (e.g. usually into your face) Eye specs/goggs at least wo…') |
m |
||
| Line 1: | Line 1: | ||
* Drills ''can'' break and chunks of shank fly anywhere (e.g. usually into your face). | |||
Eye specs/goggs at least wouldn't go amiss. Have had a few very misses, hot tool steel is rather uncompromising stuff. | |||
Wearing gloves, don't use the trigger to fast mount the drill in the chuck | * Do not leave the chuck key in the drill chuck inadvertantly (they do real damage if you touch the trigger or On-button of a pillar-drill) | ||
* Make sure the drill switch is off and not locked on before first plugging in | |||
* Wearing gloves, don't use the trigger to fast mount the drill in the chuck | |||
etc. | etc. | ||
*Watch what's behind if drilling blind e.g. fuel tank below cab floor! | |||
Revision as of 23:05, 25 July 2010
- Drills can break and chunks of shank fly anywhere (e.g. usually into your face).
Eye specs/goggs at least wouldn't go amiss. Have had a few very misses, hot tool steel is rather uncompromising stuff.
- Do not leave the chuck key in the drill chuck inadvertantly (they do real damage if you touch the trigger or On-button of a pillar-drill)
- Make sure the drill switch is off and not locked on before first plugging in
- Wearing gloves, don't use the trigger to fast mount the drill in the chuck
etc.
- Watch what's behind if drilling blind e.g. fuel tank below cab floor!
