Difference between revisions of "General Dinitrol Rust-off"
m |
m |
||
| Line 3: | Line 3: | ||
[[File:Dinitrol_RC900.jpg]] | [[File:Dinitrol_RC900.jpg]] | ||
Turns rusty metal black, seems to leave clean metal with a semi-transparent | Turns rusty metal black, seems to leave clean metal (& any stainless or galved) with a semi-transparent purple coating, and can be overcoated within an hour or so. Spray on any dry, wire-brushed rusty surface after removing heavy scale. Into rusty seams etc is good. | ||
Highly recommended, about £15/tin, lasts well. | |||
Combined with Eastwoods Chassis Black finish, excellent for producing a tough finish on parts that have been cleaned, wire-brushed and degreased, but not necessarily sand-blast perfect | Combined with Eastwoods Chassis Black finish, excellent for producing a tough finish on parts that have been cleaned, wire-brushed and degreased, but not necessarily sand-blast perfect | ||
An example of RC900 pre-treat on bare wire-brushed metal, + 2 coats of Eastwoods Chassis Black | An example of RC900 pre-treat on bare wire-brushed metal, + 2 coats of Eastwoods Chassis Black | ||
Revision as of 00:42, 19 July 2010
Rust-Off Primer by Dinitrol, an epoxy coating that converts & binds rust & creates a good surface for subsequent painting
Turns rusty metal black, seems to leave clean metal (& any stainless or galved) with a semi-transparent purple coating, and can be overcoated within an hour or so. Spray on any dry, wire-brushed rusty surface after removing heavy scale. Into rusty seams etc is good.
Highly recommended, about £15/tin, lasts well.
Combined with Eastwoods Chassis Black finish, excellent for producing a tough finish on parts that have been cleaned, wire-brushed and degreased, but not necessarily sand-blast perfect
An example of RC900 pre-treat on bare wire-brushed metal, + 2 coats of Eastwoods Chassis Black
Brackets are Pure-Zinc spary treated (Weld-Thru)
