Interior non camping Caravelle seat arms: Difference between revisions
Hacksawbob (talk | contribs) No edit summary |
mNo edit summary |
||
| Line 4: | Line 4: | ||
A: There is a roll pin in the bar between the seat and the arm. It is a bit of a bugger to get to, mine is at about 45 degrees. Back to front: Low to High | A: There is a roll pin in the bar between the seat and the arm. It is a bit of a bugger to get to, mine is at about 45 degrees. Back to front: Low to High | ||
===================== | |||
'''toolsntat:''' Got an arm thats off here and want to fit it. Do you have to put it all the way on and then insert the roll pin ? | |||
Any cut away pics anywhere?? | |||
'''R0B:''' This might help you Andy..[http://www.weidefamily.net/vanagon/] Click on interior then armrest repair | |||
'''toolsntat:''' Mmmm looks like the blob of repair weld needs grinding then to make the socket piece swivel inside the arm | |||
Right I need to take the trim off the arm to sort this out. There are 2 screws to remove the plastic shroud but 1 is under the adjusting knob. Does the knob come off the shaft at all? | |||
'''jwhitestar:''' Yes it just pops out. Plastic is quite brittle so be careful! Maybe get the hair drier on it beforehand then | |||
'''toolsntat:''' Following on from this I have now stripped back the armrest and here are the pictures of the process... | |||
The offending article removed | |||
[[File:ARMREP_01.jpg]] | |||
Fill the knob with HOT water | |||
[[File:ARMREP_02.jpg]] | |||
Pull off (its tight) | |||
[[File:ARMREP_03.jpg]] | |||
Undo 2 screws and remove plastic | |||
[[File:ARMREP_04.jpg]] | |||
Take out staples | |||
[[File:ARMREP_05.jpg]] | |||
Ease back the cover and slide off (not that easy) | |||
[[File:ARMREP_06.jpg]] | |||
[[File:ARMREP_07.jpg]] | |||
[[File:ARMREP_08.jpg]] | |||
[[File:ARMREP_09.jpg]] | |||
[[File:ARMREP_01.jpg]] | |||
[[File:ARMREP_01.jpg]] | |||
[[File:ARMREP_01.jpg]] | |||
Revision as of 00:05, 20 May 2010
Tony tech
Q: how do you remove the arms?
A: There is a roll pin in the bar between the seat and the arm. It is a bit of a bugger to get to, mine is at about 45 degrees. Back to front: Low to High
=========
toolsntat: Got an arm thats off here and want to fit it. Do you have to put it all the way on and then insert the roll pin ?
Any cut away pics anywhere??
R0B: This might help you Andy..[1] Click on interior then armrest repair
toolsntat: Mmmm looks like the blob of repair weld needs grinding then to make the socket piece swivel inside the arm
Right I need to take the trim off the arm to sort this out. There are 2 screws to remove the plastic shroud but 1 is under the adjusting knob. Does the knob come off the shaft at all?
jwhitestar: Yes it just pops out. Plastic is quite brittle so be careful! Maybe get the hair drier on it beforehand then
toolsntat: Following on from this I have now stripped back the armrest and here are the pictures of the process...
The offending article removed
Fill the knob with HOT water
Pull off (its tight)
Undo 2 screws and remove plastic
Take out staples
Ease back the cover and slide off (not that easy)
