General Homemade gearbox removal clamp

Gearbox removal brackets Thanks To Aiden (Beaker)for lending me the gear and allowing this to be reproduced. These allow you to remove the gearbox with it attached to something solid so it doesn't fall off and injure you, but it also allows some freedom of movement to wiggle the box past the various bits. I was removing a Syncro gearbox but it can be used for 2 wheel drive boxes as well.

Error creating thumbnail: sh: /usr/bin/convert: No such file or directory Error code: 127

Gearbox removal board dimensions underside jack mount

Error creating thumbnail: sh: /usr/bin/convert: No such file or directory Error code: 127

Gearbox removal board dimensions underside

Error creating thumbnail: sh: /usr/bin/convert: No such file or directory Error code: 127

Gearbox removal board dimensions

Error creating thumbnail: sh: /usr/bin/convert: No such file or directory Error code: 127

Gearbox removal board in use2

Error creating thumbnail: sh: /usr/bin/convert: No such file or directory Error code: 127

Gearbox removal board in use

Error creating thumbnail: sh: /usr/bin/convert: No such file or directory Error code: 127

Gearbox removal brackets dimensions

.

.

.

.

.

.

.

.

.

.

Error creating thumbnail: sh: /usr/bin/convert: No such file or directory Error code: 127

Gearbox_removal_braket_template front 1:1 I drew around the bracket on A4 and scanned it in

Error creating thumbnail: sh: /usr/bin/convert: No such file or directory Error code: 127

Gearbox_removal_braket_template_rear 1:1 I drew around the bracket on A4 and scanned it in