Difference between revisions of "Gearbox Clutch CVs CV joints drain plug"
From VW T25(T3)-Tech
Jump to navigationJump to search| Line 1: | Line 1: | ||
'''douwes''' | '''douwes''' | ||
17 mm hex required. If you take a M10 bolt of about 2 cm and you put on that two nuts turned against each other, you have an adaptor you can use with your normal how-do-you-call-it wrench/tool/thingy. | 17 mm hex required Just Kampers J11205 on the tools list. If you take a M10 bolt of about 2 cm and you put on that two nuts turned against each other, you have an adaptor you can use with your normal how-do-you-call-it wrench/tool/thingy. | ||
I hope you get my drift... | I hope you get my drift... | ||
---- | ---- | ||
make sure you can remove your fill plug before you remove the drain plug, or you'll be stuck with a van with an empty gear box :-( | make sure you can remove your fill plug before you remove the drain plug, or you'll be stuck with a van with an empty gear box :-( | ||
Revision as of 20:43, 11 December 2005
douwes
17 mm hex required Just Kampers J11205 on the tools list. If you take a M10 bolt of about 2 cm and you put on that two nuts turned against each other, you have an adaptor you can use with your normal how-do-you-call-it wrench/tool/thingy. I hope you get my drift...
make sure you can remove your fill plug before you remove the drain plug, or you'll be stuck with a van with an empty gear box :-(
