Parts - Part Nos

HarryMann: (AAZ/1Y diesel engine parts)

Stretch bolts (Only the head bolts are obtainable from GSF)

Head bolts (40 N-m + 60 N-m + 90 degrees + 90 degrees; follow correct tightening sequence on gasket package)

068 103 384 A (M12 x 115mm)

B/end (rod) bolts (30 N-m + 90 degrees)

028 105 425 G (42mm) (8)

028 105 425 C (45mm) (8)

028 105 425 N (waisetd) (8)

028 105 425 K (fully threaded) (8)

Main cap bolts (65 N-m + 90 degrees)

N 102 638 01 M10x65 (10)

N 901 300 01 AM10x80 (10) Late

Pulley Bolt (90 N-m + 90 degrees)

N 905 771 01 M14x1.5x47 (1)

NB. This must be of the new style and if not retrofitted should be (i.e. This is an AAZ problem area!) Crankshaft Pulley Bolt - Service Bulletin

Bearing Shells (Std. sizes)

Mains

026 198 491

Thrusts

026 198 421

Big-ends

028 105 701 J

Seals and Gaskets (all obtainable from GSF, very expensive from VW)

Pulley end crank seal

026 103 085 F

026 103 161 B (Gasket)

Flywheel end crank seal

068 103 171 F

026 103 181 B (Gasket)

Int. shaft seal (oil pump drive)

026 103 085 F (same as pulley end seal)

Oil Pumps

For 80-90 Transporter Diesel

GSF Part No. 15307 [Shadek] (comes with the longer, angled pickup; 36mm high capacity gears)

For std. upright VW diesels

GSF Part No. 15329 [Shadek] (comes with plastic surge baffle attachment; 36mm high capacity gears)

Sump screws: (for use with integrated style windage-tray / sump gasket

N 101 725 01 (M6 x 22 x SPZ1) Sump screws (20 off)

NB. Read up on integrated baffle plate/gasket /splash tray (from other upright VW diesels) here:

Link back to Wiki on diesel sumps