Gearbox Clutch CVs CV joints drain plug

Plug Removal

douwes:17 mm hex required Just Kampers J11205 on the tools list. If you take a M10 bolt of about 2 cm and you put on that two nuts turned against each other, you have an adaptor you can use with your normal how-do-you-call-it wrench/tool/thingy. I hope you get my drift...

NB. Make sure you can remove your fill plug before you remove the drain plug, or you'll be stuck with a van with an empty gearbox :-(

This plug was very tight (seized in) and had to be freed up by punching around with a bolt/nut drift to shock it loose, before driving the correct hex plug tool into it and unwinding normally.. still v.tight as it came out though. A replacement looks in order!

Refilling

Mocki i use a 1/2 " garden hose about 3ft long and a funnel it fits, pass the hose down frm the engine bay, the funnel sits on the top of the air filter and dribbles the oil in over a period of time not unlike that of having ya tea, or watching the news...

• Tip* warm the oil gently first, it flows better, quicker and dont stink as much - just dont get caught mis using the kitchen appliances.

Magnetic plug fir tree

This is fairly typical of a long service box, no large chunks, nor lots of bronze, but obvious long-term wear.

Better the particles are on the plug than in the oil.