Difference between revisions of "VW Electrics Changing Ignition Switch"
Hacksawbob (talk | contribs) |
|||
| Line 2: | Line 2: | ||
just the nylon switch, NOT the whole lock mechanism!!!!! | just the nylon switch, NOT the whole lock mechanism!!!!! | ||
Just in case you are wondering why there is so much work involved..for security reasons VW designed it so the single switch retaining screw is inaccessible unless the aluminium steering lock housing is removed. | |||
Remove steering wheel being careful not to disturb it's straight ahead position. | Remove steering wheel being careful not to disturb it's straight ahead position. | ||
Remove plastic column | Remove plastic column cowling | ||
remove switch gear (3 screws) | remove switch gear (3 screws) | ||
knock around the shear head of the housing clamp (underneath) you can put an ordinary 8mm bolt back (this shear bolt is supposed to offer a little security that's all) | knock around the shear head of the housing clamp bolt(underneath) you can put an ordinary 8mm bolt back (this shear bolt is supposed to offer a little security that's all) | ||
Put the key in the lock first position | Put the key in the lock first position | ||
Pull off the lock mechanism | Pull off the lock mechanism sleave | ||
Pull off switch plug | Pull off switch plug | ||
Take out the ignition switch retaining screw | Take out the ignition switch retaining screw | ||
Revision as of 00:49, 13 February 2012
Red Westy
just the nylon switch, NOT the whole lock mechanism!!!!!
Just in case you are wondering why there is so much work involved..for security reasons VW designed it so the single switch retaining screw is inaccessible unless the aluminium steering lock housing is removed.
Remove steering wheel being careful not to disturb it's straight ahead position. Remove plastic column cowling remove switch gear (3 screws) knock around the shear head of the housing clamp bolt(underneath) you can put an ordinary 8mm bolt back (this shear bolt is supposed to offer a little security that's all) Put the key in the lock first position Pull off the lock mechanism sleave Pull off switch plug Take out the ignition switch retaining screw Swap over with new switch rebuild Done
Aidan cowling for steering colum off, steering wheel off, switches off, remove the allen bolt securing the steering lock and ignition switch etc...(INSERT KEY TO FIRST POSITION TO DISENGAGE STEERING LOCK!)disconnect electrical connector and pull the whole lot off, the ignition switch electric part is a seperate part on the bottom held in place with a little screw, unscrew and pull out, buy new one, fit and reassemble can't believe it's not on wiki mind
Ed it is now!
