Difference between revisions of "Brakes brake pipe parts"

From VW T25(T3)-Tech
Jump to navigationJump to search
 
(One intermediate revision by the same user not shown)
Line 12: Line 12:
----
----


can buy the lot made up from JK just shy of £100 though!
can buy the lot made up from JK just shy of £100 though! and alo only listed for an early van at April 2011
http://www.justkampers.com/shop/type_25/copper-brake-pipe-set-right-hand-drive-j16899.html
http://www.justkampers.com/shop/copper-brake-pipe-set-right-hand-drive-j16899.html




'''Simon Baxter''' on brake pipe over trailing arm. I always cut rears to 525mm for 2WD and syncro
'''Simon Baxter''' on brake pipe over trailing arm. I always cut rears to 525mm for 2WD and syncro. Ignore ETKA also, some are correct, some aren't, your better just copying the originals.
I usually just cut them (don't bother undoing, it takes too long) then use the old pipe as a guide for length, flare them then use a brake pipe bending tool and the old pipe to get the shape of the pipe before I fit it, they practically fall on then and look neat too.

Latest revision as of 06:21, 20 April 2011

Ian Hulley from busgoons

3/16" O.D. Short Male Nut M10 x 1mm (guide price ~ 24p)

3/16" O.D. Female Nut M10 x 1mm (guide price ~ 17p)

3/16" O.D. Female Connector M10 x 1mm (guide price ~ 80p)

3/16" O.D. Kunifer Brake Pipe (guide price ~ 95p/Mtr.)All the pipes I have come across are

single-flared,unless you know differently


can buy the lot made up from JK just shy of £100 though! and alo only listed for an early van at April 2011

http://www.justkampers.com/shop/copper-brake-pipe-set-right-hand-drive-j16899.html


Simon Baxter on brake pipe over trailing arm. I always cut rears to 525mm for 2WD and syncro. Ignore ETKA also, some are correct, some aren't, your better just copying the originals. I usually just cut them (don't bother undoing, it takes too long) then use the old pipe as a guide for length, flare them then use a brake pipe bending tool and the old pipe to get the shape of the pipe before I fit it, they practically fall on then and look neat too.