Club 80-90 Forums

Anyone know the best way to replace the washer nozzles without losing the pipes in the void behind the dash?
P.s. is there an easy way to access the void behind the nozzles?

Cheers

nope no access... so be carefull!

lever the nozzles out and secure the pipe so it doesn't drop back in

Boo!

That was what I was fearing. I'm slightly concerned that the nozzle may come off and the tube will be left in the void.

Any tips on clearing a blocked nozzle (obviously I've tried a pin).

it won't come off
just take your time

twist it 90 degrees but have a new washer jet ready as it will break coming out

or try blowing compressed air down the jet.