Club 80-90 Forums

fitted a new switch to my 1.9 water cooled as no reverse lights. now when you put it into reverse the reverse lights flash once instead of staying on as if the switch is being passed over by whatever pushes it from inside the switch housing. any ideas anyone ?

mike

Try removing or using a thinner washer under the switch. If you're unlucky, you may have one of those cheap switches (thanks GSF) where the terminals move or work loose. I had one of those and had to use super strength superglue to stop them moving followed by a coat of sealant/varnish to keep the water out. Worked ok after that but the quality was either poor or the guy at the end of the line checking them had nipped out for a fag.

I know its not what you asked but remember you dont need to have reverse lights for Mot or by law!

thanks to both you guys,i will try the washer fix first and would like the reverse lights working but if all fails its a spot to a switch !

mike

No that would be true as not all vehicles had them. I do know howerver that fog lights if fitted (even if not originally) must work - ie if you added one, it should work or its a fail. It would seen sensible to bring reversing lights into line with fogs now, but there you go.

jamesc76 wrote:I know its not what you asked but remember you dont need to have reverse lights for Mot or by law!