Page 1 of 1

Clips for cab door seals

Posted: 14 Mar 2012, 09:42
by Cruz
I'm going to be bonding a new seal to my replacement cab door this week. I've never fitted one or taken one off and I am wondering what you do with the little clips in the link below

http://en.serial-kombi.com/volkswagen-t ... 39531.html" onclick="window.open(this.href);return false;

There are three holes in the seal.

Do the prongs of theses clip push into these holes and then get pushed into the holes in the door? :?:

Or is there another way I am too dozy to see?

Re: Clips for cab door seals

Posted: 14 Mar 2012, 12:39
by Plasticman
ah those nasty little sods, pop them into the seals and I mark the seal at the top of door frame as thats where I satrt fitting from , a quick wiz of glue in the reccess and a quick smear along the rubber , leave 5 mins till touch dry and then start with the top most of the 3 little clips, you may also have a 4th ones just near the lock mech'sm,
mm