Page 1 of 1
19" on t3
Posted: 23 Feb 2012, 17:29
by britpaked
Hi i have read and know 19" wheels will fit but my question is if anyone can help....ive seen some wheels i like fronts are 19 x 8.5j but the rears are 19 x 11j et38 will these fit the rear? i know i may need to modify the slide door? thanks for any help
Re: 19" on t3
Posted: 23 Feb 2012, 23:41
by faggie
i have 8 1/2 x18 and 11x18 and they fit but i had to modify the sliding door mech and front suspension not shure what offset they are
Re: 19" on t3
Posted: 03 Apr 2012, 20:18
by paintsprayer74
hi,i have just fitted merc s class 19 inch wheels ,the mods are as follows,front -longer studs,,rear -25mm spacers and the edge of swing arm ground back and seem welded(im a panel beater by trade so get someone confident to weld this)only about 45mm on the edge where the tyre meets the arm,the wheels i have are 275/40/19 rear and 255/40/19 fronts,the wheels are 7 inch rear offset and 6.5inch front offset,i will send you some pictures if needed