Page 1 of 1

Please can anyone help

Posted: 12 Feb 2012, 15:39
by pornking
Ive fitted bigger head lamp bulbs reciently
But on on a long journey stopped turned lights off went to set off again &. Found that i had no head lights
Only side lights ?
After inspection ign on headlight switch on flash for high beam ( still working) the inside heater blower works , & wipers but no dip only flash on high
Head light switch off only flash high beam
The inside heater blowers stopped working & wipers & will only work with light switch on & flash for high beam
I cant get my head round it ive just chainged the relay still the same

Re: Please can anyone help

Posted: 12 Feb 2012, 16:57
by KamperKev
Its worth checking the lighting earth leads. You'll find them in the glove box but you need to unscrew the fuse / relay board and pull it forward. You will see a multi-ground socket on the bodywork behind with all the lighting earth leads connected. Check them all and give them a good clean. May need to give them a little squeeze(with pliers) when they are off the terminal to make sure they are making good contact..
Might be barking up the wrong tree, but worth a looky...
best of luck
Kev

Re: Please can anyone help

Posted: 12 Feb 2012, 18:29
by pornking
Cheers bud just checked earths . All ok
Could anyone tell me what relays are what please.
ive worked out one for indicators
One for headlight flasher than a third one ? Or a fuse / relay diagram please

Just trying to work out whats happened
Or how do i test headlight switch ,but would that cause all other things to play havock ,wipers n blower
But then i thort dip & main on stalk but how would that affect the blower
Its on my 87 crew cab
Getting sooo hacked off

Re: Please can anyone help

Posted: 12 Feb 2012, 19:16
by edoh
relay/fuse information

http://www.brick-yard.co.uk/VehicleSpec ... relay.html" onclick="window.open(this.href);return false;

:)

Re: Please can anyone help

Posted: 12 Feb 2012, 21:27
by pornking
Is it me it wont open

Re: Please can anyone help

Posted: 12 Feb 2012, 22:10
by BOXY
Just go to http://www.brick-yard.co.uk/home/home.htm" onclick="window.open(this.href);return false; and navigate to it manually.

Re: Please can anyone help

Posted: 13 Feb 2012, 02:06
by andisnewsyncro
"Bigger head lamp bulbs" - what do you mean? It's most probably an earthing issue, or your "bigger" bulbs have fried the already overloaded headlamp circuitry.

Re: Please can anyone help

Posted: 13 Feb 2012, 08:36
by pornking
I fitted the 4 square head lights from just the standard twin round. Than thort it would be clever to up grade h4 s to 100,130 w & n h2 s to 130 w
O dear
it was bright
Thinking about it now i should of just fitted my spare hid kit less probs