Club 80-90 Forums

On the sliding door, where the rear, waist level, hinge/roller/bracket slots into the door and bolts on I believe there should be a seal of some type.

Does anyone know what form it takes and it they are available, still, please?

thanks
Garyd

Not available from anywhere I know
second hand is the way I see

Gasket 251 843 402 B

£1.07 +vat

VW commercial dealer

Thanks Cruz.

I will see what my local dealer makes of that number.

cheers

Garyd

some of them have a foam type seal but over time it breaks up

My dealer tells me that the part number Cruz provided is no longer available. I shall see what i can do with a strip of closed-cell insulation foam.

thanks
Garyd

garyd wrote:My dealer tells me that the part number Cruz provided is no longer available. I shall see what i can do with a strip of closed-cell insulation foam.

thanks
Garyd

Sorry, my other parts system does indeed say it went NLA on 01/06/2011

If it helps I found this picture of what it looks like using google

Thanks for picture, Cruz. I had gotr the impression it was something like thatr from the parts fiche picture.

I have cut a small strip of close cell foam and managed to poke it into the gap on the outside of the hinge. The inside gap is very small - too small to get anything much into - I shall leave that.

cheers
Garyd