Club 80-90 Forums

The mirrors on my van are electric
But they don't go anywhere the wires that is
Being a lhd it would be good to get them going
Does anyone have any good ideas/wiring info switch ideas etc
Thanks all

http://www.pbase.com/tonytech/image/84681016
This is the wiring.

Thanks tony
Don't really understand it but I guess if a get a suitable switch give it a feed and work out the wires that would work
I have not removed the door cards but would I find the loom equiped to connect into??
The van is a 91 Westy California

use tonytech's diagram and if you have a look here page 8 and 10 i think shows the wiring ,have you got the fat bundle of wires going into the door? as you need this !
https://club8090.co.uk/forum/viewtopic.p ... &start=105" onclick="window.open(this.href);return false;
mm

Here's another diagram of the mirror circuit.


I used the loom and switch out of a 89 Passat.

That is one very usefull diagram, ta
mm

When it gets back from the painters a shall check it all out