Club 80-90 Forums

hi is it possible to do a hub conversion using hubs from the front of the t25 to the rear.has anyone done this and is it easy,cheers dave

It would be impossible.For a start.How would you attach the drive shafts.And how would you fit this.


In place of this.

might have said the wrong thing just wanted to know if you can try and change what the wheel bolts on to so you can use bolts instead of nuts or would i have to go for longer studs as when i put my mercedes wheels on not enough of the stud comes through

Ahh.That makes more sense Just get yourself some longer rear studs.Brickwerks sell them They also sell the stud conversion kit for the fronts.

just found out you can do a stud conversion for the front so you can use nuts all round,thanks anyway,how long should i get as there are a couple of sizes how much thread at least does the nut have to bolt on to,cheers dave

get the longest you can as you can cut them down, the nut needs all of it's thread interlocked with the stud

good luck getting the hub nuts off

are they a fecker to get off,do the back studs just tap out with them being splined,cheers dave

yes just tap out

thanks